Coatings
Features We Protect
- Excellent chemical resistance properties
- Resistance to cathodic disbandment
- Resistance to moisture permeability
- Prevention of steel pipe from corrosion
- Prevention from any physical damages to either the pipes or the fusion bonded epoxy during handling
- High performance characteristics
- Extended life cycle
Bond Strength We Provide
The external 3LPE coating and lining performed at Hind Metal is bonded firmly to the mild steel pipe surface and the mean adhesion strength is 125 kg/cm² (ASTM D 4541)
Working Life We Promise
At Hind Metal, we promise consistent performance characteristics of our 3LPE coated pipes throughout the service life span of 75 years
Customized Solutions We Offer
We apply 3LPE external coating on pipes from diameters 25 mm to 3000 mm with lengths of up to 12m.
Manufacturing Capabilities We Embrace
- Diameter range: 25 mm to 3000 mm
- Pipe length: 6 m to 12 m
- Operating temperature range: -40°C to 80°C
- Coating thickness: Maximum up to 4.2 mm
Standards & Specification We Follow
- DIN 30670
- CSA Z245.21
- ISO 21809-1
Depending on the application, the dual-layer FBE can also come with an Abrasion-Resistant Overcoat (ARO), to reduce damage to pipes.
Features We Protect
- Corrosion and chemical resistant
- High resistance to cathodic disbondment
- Increase the life span of steel pipes
- High bond strength that firmly bonds to the mild steel pipe surface.
Bond Strength We Provide
FBE coating and lining performed at Hind Metal is bonded firmly to the mild steel pipe surface and the mean adhesion strength is 125 kg/cm² (ASTM D 4541)
Working Life We Promise
At Hind Metal, we promise consistent performance characteristics of our FBE coated pipes throughout the service life span
Customized Solutions at Hind Metal
- We apply 3LPE external coating on pipes from diameters 25 mm to 3000 mm with lengths of up to 12m.
- We also coat Bends (Elbows), Tees, reducers, couplers can with FBE coating
Manufacturing Capabilities We Embrace
- Diameter range: 25 mm to 3000 mm
- Pipe length: 6 m to 12 m
- Operating temperature range: -40°C to 200°C
- External Coating thickness: Maximum up to 4.2 mm
Standards & Specification We Follow
- CSA Z245.20
- AWWA C 213
- AS3862:2002
- GAZ de France R 09
- GBE/CW 6
- NACE RP 0394
- NF A 49 706
- ISO 10080
- ISO 9001
Features We Protect
- Strong adhesion to steel pipes
- Excellent chemical resistance
Working Life We Promise
At Hind Metal, we promise high hardness, abrasion & impact resistance through pinhole free PU Coating that provide typical
Standards & Specification We Follow
- NACE
- ASTM
- SSPC
- AWWA
- ISO
Driven by innovation, Hind Metal offers this latest technological advancement of Polyurea Coating in the field of protective coating industry and facilitates its clients to put back the facilities in significantly lesser time compared to the others.
Features We Protect
- Corrosion resistant
- Excellent chemical resistant
Waterproofing We Provide
Excellent water resistance property that impermeable membrane provides, make Polyurea coating less sensitive to humidity.
Working Life We Promise
At Hind Metal, we promise consistent performance characteristics of our FBE coated pipes throughout the service life span of 75 years.
Structural Enhancement We Offer
Due to its excellent abrasion resistance, chemical & environment resistance to the applied area, Hind Metal offers Polyurea coating for various industries and objects like
- Roof Coatings
- Pipe Protection
- Tank coatings
- Truck bed liners
- Freight ship liners
- Bulk transport wagon liners
- Conveyer belts
- Car park decks
- Bridges
- Offshore
Standards & Specification We Follow
- NACE
- ASTM
- SSPC
Fusion Bonded Epoxy(FBE) Coating
Typically assumed as the external protection of steel pipe, Fusion Bonded Epoxy has been proven successful in the area of corrosion protection, hydraulic improvement and deposit diminution for the Internal surface of line pipes as well. FBE Coating’s adhesive properties, chemical resistance, high degree flexibility and good impact resistance are highly required for the coating of the pipe, valves, fittings and for downhole materials such as tubing and casting in oil and gas pipelines. Hind Metal, being the only service provider of internal FBE coating across the country, acquires latest technology to internally apply thermoset lining inside the steel pipes where internal corrosion protection or a smooth surface is required. This lining reduces friction and compression costs and provides a clean internal surface along with corrosion protection.
Features We Protect
- Prevention from encrustation
- Excellent chemical resistance properties
- Provides smooth surface by increasing “C” value.
Frictional Efficiency We Provide
- Less frictional losses because of high ‘C’ value compared to other pipe linings
- Hazen Williams coefficient or ‘C’ value is 150 which stay constant throughout the life of the pipe.
Working Life We Promise
At Hind Metal, we promise consistent performance characteristics of our FBE coated pipes throughout the service life span
Customized Solutions at Hind Metal
- We apply 3LPE external coating on pipes from diameters 25 mm to 3000 mm with lengths of up to 12m.
- We also coat Bends (Elbows), Tees, reducers, couplers can with FBE coating
Manufacturing Capabilities We Embrace
- Diameter range: 25 mm to 3000 mm
- Pipe length: 6 m to 12 m
- Operating temperature range: -40°C to 200°C
- External Coating thickness: Maximum up to 4.2 mm
Standards & Specification We Follow
- CSA Z245.20
- AWWA C 213
- AS3862:2002
- GAZ de France R 09
- GBE/CW 6
- NACE RP 0394
- NF A 49 706
- ISO 10080
- ISO 9001
Polyurethane (PU) Coating
Polyurethane coatings have been specifically designed as corrosion and abrasion resistant coating for long term protection of internal surface of the pipes used for transmission of various fluids. PU coating contains pure resins which make finished product safe for drinking water and food contact. PU can be cured at any ambient temperature and coated products have a very fast curing time. At Hind Metal, we apply this 100% solids system that is free from solvents and VOCs, that meets with the strict health, safety and environment standards.
Features We Protect
- Strong adhesion to steel pipes
- Excellent chemical resistance
Working Life We Promise
At Hind Metal, we promise high hardness, abrasion & impact resistance through pinhole free PU Coating that provide typical service life is said to be of 30-50 years
Standards & Specification We Follow
- NACE
- ASTM
- SSPC
- AWWA
- ISO
Coatings made from HALAR provide excellent chemical resistance and electrical properties to equipments that are operating at the temperatures up to 300°F. These are best suited for full vacuum applications. Some of the brilliant characteristics of Halar Coating are
Halar coatings performed at Hind Metal, provide outstanding chemical resistance to strong mineral and oxidizing acids, alkalis, metal etchants, liquid oxygen, and essentially almost all organic solvents. Anti-static and filled versions are also available with us depending on the application requirements.
Features We provide
- High dielectric strength
- Excellent resistance to weathering
- Ability to self-extinguish
- Abrasion and Impact resistance
- High Tensile Strength
- Excellent corrosion resistance
Standards & Specification We Follow
- ISO
- NACE
- SSPC
PTFE Coating performed at Hind Metal combine heat resistance with almost total chemical inertness, excellent dielectric stability, and a low coefficient of friction. Chemically inert and solvent resistant coating having unique electrical properties, PTFE coating is an excellent choice for linings in pumps, pipe, tanks, valves, agitators, and a variety of vessels.
Features We provide
- Anti-galling
- Temperature resistance
- Low friction and abrasion resistance
- Non-wetting
- Non-stick and release
- Precisely composed
- Longer shelf life
- Easily melted
- Enhanced shelf life
- Highly effective
- Corrosion resistant
Standards & Specification We Follow
- ISO
- NACE
- SSPC