Inconel 600 Sheets, Plates & Coils

INCONEL 600 Sheets are almost exclusively supplied in the annealed condition.

Hind Metal is one of the most prominent manufacturer and supplier of Inconel 600 Sheets. Welding Inconel 600 Plates (UNS N06600) can be achieved via shielded metal-arc welding, TIG, and MIG. Inconel 600 Coils can be joined by the usual welding, brazing, and soldering process. Bar stock may need to be stress relieved, or annealed before performing any heading operations. Alloy 600 Plates are often in a lot of applications such as for Heat treating retorts and muffles, Vacuum furnace fixtures, Titanium dioxide plants, Chlorination machinery to 1000 Degree F, etc.

Our Alloy 600 Coils is mixture of pure and best quality metals as our experts check very carefully each and every step of mixture. These products come in standard sizes. Other customized sizes and shapes are welcome as well.

CHEMISTRY TYPICAL

Nickel + Cobalt: 72.0 min.
Chromium: 14.0-17.0
Iron: 6.00-10.00
Carbon: 0.15 max
Manganese: 1.00 max
Sulfur: 0.015 max
Silicon: 0.50 max
Copper: 0.50 max

PHYSICAL PROPERTIES

Density: 0.304 lbs/in3, 8.42 g/cm3

Electrical Resistivity, ohm-circ mil/ft, (µ0-m): 620 (1.03)

Specific Heat, Btu/lb-°F, (J/kg-°C): 0.106 (444)

Mean Coefficient of Thermal Expansion: in/in/° F (mm/m/°C)

70 -20 0 ° F (21 -93 °C) -6.9 x 10·6 (12.4)

70 -40 0 ° F (21 -20 4 °C)-7.3 x 10·6 (13.1)

Modulus of Elasticity: ksi (MPa)
30 x 103 (20 7 x 103) in tension

Magnetic Permeability, H = 20 0 Oersteds:

Annealed: 1.010

Melting Point: 2470 -2576 ° F (1354 -1413 °C)

FORMS

Coil – Strip, Foil, Ribbon Wire – Profile, Round, Flat, Square